NB: for multiple or quantity orders, please call for reduced carriage charges
If ordering from outside of the U.K mainland or from
Winch Type Divider Posts
Pitch divider systems allows the playing surface to be divided up into sections. Designed to be installed outside of the perimeter fence and can hang netting with minimal sag over a span of up to 63m.
- 100mm square posts manufactured from 4mm galvanised steel that are polyester powder coated green, other colours available POA
- Winch post is fitted with a high specification brake winch and top pulley wheel
- Dummy post complete with pulley wheel and cleat
- Winch has enclosed gears for added safety, detachable handle and a maximum load rating restricted to 100kg
- Available in the heights shown below
Pitch divider posts must be installed in a minimum 1 metre cube of concrete, consult a construction engineer for advice where required. The posts are designed to be concreted directly in the ground but ground sockets can be supplied seperately at an additional cost
All prices exclude VAT and carriage
Economy Winch Type Posts
Designed to be installe outside of the perimeter fence and can hang netting with a minimal sag over a span of up to 63m
- 100mm sq.posts manufactured from 4mm thick galvanised steel that are polyester coated green
- Winch post is fitted with an economy winch and top pulley wheel
- Dummy post complete with pulley wheel and cleat
- Winch has exposed mechanism and a maximum load rating of up to 350kg
- Available in the below heights.
(Please note the load rating is not restricted and can be over tightened)
Pitch divider posts must be installed in a minimum 1 metre cube of concrete, consult a construction engineer for advice where required. The posts are designed to be concreted directly in the ground but ground sockets can be supplied seperately at an additional cost
All prices exclude VAT and carriage
Pitch Divider Netting
50mm square mesh, UV resistant, 2.0mm thick black polypropylene netting with selvedged edge
2.7m high per metre CRK-011
3.0m high per metre CRK-012
3.6m high per metre CRK-014
Allow 2.5% extra on overall length of netting
All prices exclude VAT and carriage
Net Storage Pouch
PVC storage pouch designed to fix to welded-mesh fences. The pouch allows for easy storage of the divider netting protecting it against unnecessary wear and tear when not in use
- 1 x 900mm high black pvc pouch complete with 2 x fixing plates and antiluce fasteners for ease of use
- 4 drainage holes along bottom edge to eliminate water build up
Pouch designed to take netting of up to 65 linear metres